Kenmore 15864/15862 Top Load Washer "direction turn timer knob" Questions

...knob on. It or the timer knob may need replaced. Here is a picture of the timer knob and the spring clip. Sure hope this helps and best wishes. MY WASHER TIMER KNOB WILL NOT TURN TO START MY ...

...knobs and the timer through sears parts direct are under 100 probably with shipping. If the knob that you pull out and push in does not feel sloppy when you turn it then i would guess timer is

...direction. Once the knob is off, the clear plastic dial underneath should pull off. There is a single screw under the dial that holds the timer in place. You can access the timer by popping the ...

...turn the knob to spin and it will spin and finish the cycle. Therefore I beleive it must be the timer. How can I fix it? Thank you for help. :)Patty YES IT IS A FAIRLY EASY FIX AND SOUNDS LIKE you ...

...machine? to remove the timer knob and dial,push the knob in and turn in a counterclockwise direction the knob will unscrew completly off then place a small screwdriver behind the dail and pop it ...

...Does you machine not advance mark the timer knob and, see how far the knob advances next set the timer for the agitate position and check the timer for continuity on those pins noted on the ...

direction to spin. When the wash motor will not turn on it may be faulty. If the motor makes strange humming sounds then the motor may be at fault. To test the motor, remove the belts and try to start

...direction or another and ever so slightly pulling it or pushing it the tiniest bit until it seems to 'catch'. It can take a long time to find a spot that 'catches'. The second I take my hands off the ...

hoe do I remove the timer control knob from a Roper model RTW444oVQ Push knob in and turn it in a counterclockwise direction

...timer. Usually, trying to un-screw the knob won't work by itself since the shaft will also turn. I found that if you hold the back of the shaft with a thin needle-nosed pliers, you can unscrew the ...