AudioBahn A6004T Car Audio Amplifier "fix amp" Questions

...amp. To fix this simply replace the fuse with a new one of the same ampere rating, it shouldn't be hard to find. If all your fuses are good you'll have to see a service professional to fix your amp, ...

all the time my amp is not pushin full power all the tim. what can i do to fix that ? You can try bridging the amp to see if that fixes the problem. Should be a diagram on the speaker input on the amp

...fix a fried amp? I was hooking up a compaciter and didnt realize the compaciter had a charge stored in it. When tring to hook up to my amp, it touched the chassis of my amp and the amp has ceased to ...

...amp l want it fixed my name is kobey if you can fix it give me a call 770-616-6113 or email me @ [email protected] thanks abunch!!! You should open the amp and check if you've popped a transistor. ...

amp? How do i fix the rca's on the amp? the amp turns on and the green light comes on but the amp does not give power to my subs. So i think the rca relays are blown. can it be fix'd or hot wired some

...amp just stopped working and i have tried everything to fix it that i can by myself. how much would it coast to get it fixed? where could i do it? would it coast more then it is worth? any help would ...

...fix by replacing the shorted components.(usually the transistors where shorted) Which fixed the amps I bought. Which caused the amp to constantly enter protection mode, with just the amp connected to ...

...shorted the output transistors and replacing them will fix your issue. inside the amp you will find three legged transistors that mount to the amps body/heat sink. replace all of them. good luck

amp 1000/1 fix I was wondering if you have a way to fix the output on this amp. My amp turns on fine and everything look fine but there is no sound coming out. Im pretty sure its the rca inputs on the

...but now the amp doesn't kick as loud as it use to before the power lose. I tried a different amp and L7 sounds fine. Any possible fix for the Brutus? Thanks. Make sure of voltage going in to