Kenmore 88752 Top Load Stacked Washer / Dryer "replace pump stack washing" Questions

...replace the pump? Where would I get a new one? Thanks. Did the unit ever drain? If it did, has anything changed? Make sure the drain hose in back has not pinched (unit slid backward against the wall, ...

...will not drain I have a Kenmore stacked washer and dryer, it will spin but will not pump water. Replaced the pump, but still will not pump. Can you help me? Check for plugged drain hose, or hose ...

the pump stoped running I took the pump off and pluged it in a power cord and it runs Mine did same thing I took pump apart and found that the impeller was stripped out replaced pump works fine now.

...if the dime was pulled from the pump it most likely damaged the impeller and the pump should be ...

pump outlet nipple to no avail. As soon as I started the wash cycle the same are leaked. The water is getting passed the clip and out of the hose. Any suggestions please. You may have  a pin hole

i'VE GOT A WHIRLPOOL STACKING WASHER DRYER COMBO BOUGHT APPROX 2002. wASHER WORKS FINE, pUMPS WATER OUT FINE BUT ON SPIN CYCLE SEEMS OFF BALANCE AND MAKES ALL KIND OF BANGING NOISES. i EVEN TRYED SPIN

replaced water pump but washing machine still will not drain. Fills and Agitates fine but than stops. sounds like your lid switch

...replace the pump drain on a Top Load Stack washer/dryer combo. The back is an all metal panel that is tacked into place and cant get it off. Any ideas as to how to get to the pump drain to replace? ...

Won't drain. At the end of wash cycle, tub spins and wseems to work properly but water won't drain. check the filter at the botom remove and clean. CHECK AND CLEAN THE WATER PUMP, IF IS BAD REPLACE.

washing machine doesn't drain properly and makes screeching noises and has burning rubber smell On this model the drain pump bearings tend to out often. You can open the machine cabinet and check the ...