Kenmore Elite 45986 Front Load Washer "washing machine tub perfectly centered" Questions

...if a load is perfectly balanced (pretty hard to say for sure), the tub will build up movement until the unbalanced sensor is tripped or the outer tub hits the inside of the cabinet.  

tub, you'll see the "wash plate" (it's got that knob thing right in the middle of it). Now... if you can imagine that wash plate outta there, what you'd see is what Whirlpool calls a "nutator" (<--

...Washing clothes again after about 30 minutes of work and the $100+ bucks still in my pocket. Thank you all and hope the extra info helps someone out there. Cheers! I just had this same problem. The ...

...tub that is not draining at end of cycle, and your washi cycle is taking a lot longer that normal to complete,then here is what to do. This solution is easy, and will take no more that 15 minutes, ...

...washing machine rattles loud almost as if its off track could be agitator bearings or the tub is off center. it means it is not balanced. could be the load of clothes u put in !Or the machime itself ...

fav6800AW leaking from bottom of tub Just replaced the clutch, washer is working perfect but have a leak from bottom center of tub. Thinking this is what cause the original clutch to go bad You will ...

...tub Brand new machine. Outer tub is not center to the inner tub causing a wobbly spin. Repair man wants to replace both tubs...thinking it has a bent shaft. Do I want this kind of a repair done on a ...

washing machine shakes and walks away basically, any suggestions? Mean machine is it not? Basically if you tip this washer over to move it into position without putting in that styrofoam packing block

...perfectly square it will be off center when spinning, i assumed you used a hammer and a drift as i have done in the past if so there is a very slim chance of getting it right the only way we have ...

...tub. If the alignment is off and not exactly in place the agitator will move or the gear-like part will wear down, become rounded, or break. The agitator must fit perfectly and tight. A nut on top ...