...LINT TRAP? I need to find the location of the lit trap on my kenmore elite washer. the model# is 110 22996 100, serial# CL 1601554. Thank uou in advance for your help. Remove 3 screws from the bottom ...
...lint trap. It's an old machine . Any suggestions? i don't have booklet- Machine was part of the sale of house. Do you know where i can find a manual that explains the cycle and how they all ...
Question about Kenmore Elite Washing Machines
...with it (yet-they are mailing it to me). I am trying to figure out where the lint trap is and how to empty it. mine does this too-- I was just checking to see where the filter is to be cleaned.
Question about Kenmore Elite Washing Machines
...washing machine tub or it could be in the **** Trap in the wall, since it's heavier than water it would be the most likely place. and if not there then the over fill tub on the sides. If you are ...
...lint trap The images below show the steps for accessing and pulling the filter on the drain pump. Unplug the washer and remove the bottom front service panel. Arrange a container to catch water that ...
Question about Kenmore Elite Washing Machines
...a lint trap and how to I empty it? Thanks. You must remove the inlet hose to the pump to find the screen. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE
...it and took a look underneath. Saw the pump (direct drive to the motor. Did not remove pump (three screws. did not see a lint filter. Help Can only be blocked or a blocked air trap. Regards ...
Question about Kenmore Elite Washing Machines
...lint" trap that connects to the pump and the gray drain hose. He took off the white trap and it was awful. There was debris and stagnet water-the smell was awful. Needless to say, we removed it and ...
...lint trap on the front loader Where is the lint trap on the Kenmore front loader washer? There is no lint trap. There is a coin catcher on the pump. The design of the wash action on a front loader is ...
Question about Kenmore Elite Washing Machines
...lint or other foreign matter in the trap/pump or actual oversudsingIf you have had this machine for a while and have had no problems and you have not changed additives or water hardness, then it is ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions
