Question about Kenmore Elite Washing Machines
...the cycle to start. how can i correct this Hi there, Well it means there is some problem in the Lid switch - If the lid switch is defective, your washer can't spin and may not function at all. ...
...HE3T does not have enough water to wash clothes. Is there any way to add more water? Your pressure switch stops the water and allows it to start the next cycle. It's a switch either in the control ...
...plugged. If this doesn't resolve the issue then it is a problem with the water level pressure switch operation. There could be a blockage in the air dome or pressure switch hose. The air dome
Question about Kenmore Elite Washing Machines
...and SUB when washer is started Error codes F35 and SUB F35 is a water level error. The water level switch (pressure switch) has malfunctioned. If you remove the top panel, three screws in the back, ...
F35 error displayed F35 is a water level error. The water level switch (pressure switch) has malfunctioned. If you remove the top panel, three screws in the back, you will have access to the pressure ...
switch door? Can you switch the door to the other direction, If so, how? unlike fridges, ive never seen a washer that you could switch the door around, mainly due to the switches and hinge set up.
Question about Kenmore Elite Washing Machines
...the load with water and goes to ol at end of cycle Hi. The water level is determined by a pressure switch. The pressure switch is located near to the control module and attached to thin a rubber
Question about Kenmore Elite Washing Machines
...location of Kenmore washer he3k. give sud and f35 code i want to know the location of the presure switch and how look like. F35 is a water level error. The water level switch (pressure switch) has ...
F35 Sud errors repairman came out. switch is on back order no delivery time. Very frustrating. It is under warranty. I am trying to run the clean cycle a couple of times now. F35 is a water level ...
Question about Kenmore Elite Washing Machines
...to the washing machine. Is it plugged in? Has a fuse blown or is a circuit breaker tripped? Lid switch If the lid switch is defective, your washer can't spin and may not function at all. The ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions