Kenmore Elite 45986 Front Load Washer "pully bolt loose" Questions

...pully for free to see if it would solve the problem as it happened only due to the bolt coming loose on shaft that is attached to the basket. My concern is if i order the part myself and the actual ...

pully in the front is fixed and I don't know how to get the belt around it. It looks like I can install the belt on the large pulley by fishing it through from underneath. Use the correct sized belt!!

...pully when i turn drum wheel by hand. machine not that old and belt in good condition (checked it against new one). how do i refit belt and make it stay on Hi from retired Englishman in SW France, I ...

...the bolt is in it, then grab ity and twist it do you feel any drag on it if not look under the machine and see if the pully has slipped down or if something looks loose. you should norice any ...

...loose but rear pully/bearing/shaft seems solid. Front edges of plastic outer drum appear scraped from inner drum wobbling. Does anyone know if inner drum is welded or bolted to main shaft? If welded, ...

...bolt that can be undone slightly so the motor can be moved down to tension the belt if it seems loose and others do not, but if you anre unsure you can always get a new belt anyway. Another ...

...pully and the tub body), the gap seems to close in right when there is the *clank*, then it goes back, as if the pulley arm is angled. It is as if the pulley arm is either bent or the bearings are ...

...pully seated properly. As I state in that post you don't need a torque wrench, just seat the clutch properly and snug the clutch pulley 3/8" bolt. My repair process for clutch maintenance/replacement ...

...bolt that hold the pully onto the tub is tight on. Make sure the pully isnt loose. Inspect it for any small craks where that boltt tightens up. If the pully check out ok. Check the small motor pully ...