Kenmore Elite 45986 Front Load Washer "model 417" Questions

Ad

Question about Kenmore Elite Washing Machines

1 Answer

...Model # 417-99170810. Thank you, Janis Paris, ON do you use a lot of fabric softner? If you do this might be your problem try to change soaps and stop useing fabric softner. try useing powder ...

Ad

Question about Kenmore Elite Washing Machines

1 Answer

417-41142000. They told me they were unaware of any problems. Just found this site. The two springs that suspend the plastic tub cut through the eyelets on the tub, the oneside completely through. The

Ad

Question about Kenmore Elite Washing Machines

1 Answer

Model #417 43142200 It appears your dispenser solenoid has failed in this instance. For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a

Question about Kenmore Elite Washing Machines

1 Answer

...model 417 I took off the inner bearing of kenmore washer tub I don't know how to put it back, it's with spring. I can't put the spring back with the inner bearing. I need help, Raffi For replacement ...

Question about Kenmore Elite Washing Machines

1 Answer

...model #417-43052200. My rubber seal is not attached to the drum. It came off at the bottom and water leaked to the floor when doing a load. In trying to re-attach it (very difficult) I suceeded in ...

Question about Kenmore Elite Washing Machines

1 Answer

model #417 This advice is for Kenmore Elite and Whirlpool Duet model front loading washers. If you experience a problem where the door becomes jammed and will not unlock or open, here's an easy way to

Question about Kenmore Elite Washing Machines

1 Answer

...model serial no. 417.29042992 Thank you, Marcus If you are talking about the inner spring that holds the door bellow to the tub, it's going to require two hands to get the spring to go back in the ...

Question about Kenmore Elite Washing Machines

1 Answer

...417 washing maching. I am trying to determine if it would be more cost effective to buy a new machine. Rear Tub Bearing Replacement = 3-450.00 depending on your location. It is a labor intensive job. ...

Question about Washing Machines

1 Answer

...spin replaced shocks because one was broke be still will not spin if model # starts with 417 replace motor control located at the base of unit. if not 417 please post with model and make of ...

Question about Kenmore Washing Machines

1 Answer

model 417 44152400 lights on wont spin or drain kenmore washing machine model 417 44152400 lights on wont spin or drain check the lid switch

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

4,936 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Vernon Taylor

Level 3 Expert

6991 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...