...little slots in the other end of the wire-post with the brass ring now housing the spring inside the white plastic housing, in front of your flathead, which you should now be able to remove, slowly, ...
Question about Frigidaire Washing Machines
...green cleaning products - the detergent is a quickly biodegradable, highly concentrated powder, and all I need is a 1/4 - 1/2 teaspoon per load. After about one week of using the Norwex detergentI ...
green door lock LED goes out and the machine goes into standby mode and stops working. I suppose it's a faulty door lock. I've dismantled the front of the machine to have a look and I can't see what's
little earthing cable set just inside the pulley rim. Carefully release drum/case supporting springs (mark positions top and bottom) and, drop drum/case onto some blocks and lift/pull/take out (really
...green) between where the front panel and the top come together. (use a flash light to help locate) Take a metal putty knife and push the clips towards the rear while lifting on the corner. (This is ...
...green lights comes on and then displays UL. What is wrong with the washer? Hi from retired Englishman in SW France I mostly answer front load problems but ' out of balance' is a common problem with ...
...green looking snapping ring just below the dome, you would have to snap it upwards and the dome comes off then theres a top cover you jus pop off) . . now you will see the agitator cam. I dont think ...
...green) between where the front panel and the top come together. (use a flash light to help locate) Take a metal putty knife and push the clips towards the rear while lifting on the corner. (This is ...
...green clip around dispenser down..take a little screw driver and remove all that wax build up...turn dispeser right side up and let hot water hot as possiable..now you should be find...if not add a ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions