Kenmore Elite 45986 Front Load Washer "drum sounds water sloshing" Questions

...drum. Took off front panel. Both tubes are clear. Any ideas? I found when mine doesn't drain there is a sock blocking the drain holes. Open the door and pull out the rubber gasket at the bottoma nd ...

...drum) anyway, the problem is with advancing the cyckes (keeps shutting off) any suggestions on getting the water out The sloshing sounds you hear are supposed to be there. Actually, it was there when ...

...water sloshing sound still occurred when I turned the Inner Drum. What should I check to correct this problem? Please note that I had a problem with the door boot seal previously. Water was not ...

...water not in the drum but when I turn the drum I can hear it sloshing (sound like quite a bit) and if I don't do laundry for a few days it stinks. I had a maytag repair man in and he said that is ...

...drum around when the machine is finished, you can hear water sloshing around. It also smells like mold/musty. Is the sloshing sound normal? Your unit is not draining correctly. The mold and musty ...

...water in there when I turn drum by hand.) Hello, The earlier Maytag Neptune front loaders have a balance ring on the inner tub that has liquid in it and that causes the sloshing sound when you turn ...

...sounds like there is water sloshing inside This is not a problem actually. That is quite normal for top load washers. What happens is when the pump comes on to expel the used water it only runs long ...

drum back and forth I can hear water sloshing. d sounds as if your having a timer issue here. not recognizing the end of cycle and entering a new one ( bad timer).. as far as time of unlocking this is

...sounds like to much water check diaphram switch this controls the amont of water taken in this is not normal operation also check that the drum dampers are working ok or have not come adrift, when ...

...water softener unstaaled in the house - but most people don't. If you do a lot of laundry, the strut rods that hold the drum in place wear out( mine lasted six years) and that will make it out of ...