Kenmore 63932 Electric Dryer "damp clothes" Questions

clothes are slightly damp. inside dryer there is 2 metal strips clean tham off with a eraser if that dont cure it make sure vent clean going out of your home if both are done and still does it depends

my frigidaire dryer will not dry properly( still damp) in automatic mode Depending on how damp they are, it could be normal or you could have a plugged dryer vent. I say that because on these dryers, ...

...Clothes are still damp after 1 cycle. Clothes are warm but still damp. Also smell hot, burning smell intermittently most common reason for this would be clogged vent...check all the way in and

clothes still damp I replaced all 3 thermostats,thermal fuse and heating element as well as cleaned out the dryer vent and my clothes are still damp. Any suggestions? have you checked the dryer ...

...clothes are still somewhat damp. wondering if there is a monitor or dampness gauge that is dirty? There may be.Look inside the drum. The dampness sensor looks like two metal strips a few inches long. ...

The dryer is hot but the cloths are damp after 2 hours in the dryer..its hot but the cloths are still damp? check the air in let and out let pipe are not blocked up with fluff if the dryer cant breath

...clothes are damp when cycle ends and they are not warm. what do i need to fix this? if the clothes are damp then I would disconnect the vent tube, and dry a load of clothes. If they are dry then the ...

...and exit from this mode. Hope this works............ You may want to check your dryer vent when they become clogged due to obstruction or bad routing you can end up with warm damp

...clothes will still be damp when done. Also a dirty exhaust pipe (usally 4") will prevent the clothes from drying correctly. Make sure that the air is leaving the machine. To do this you have to go ...

sensor is not working clothes staying wet or damp When using the sensor dry my clothes are staying wet or damp. Do you feel any heat while its on?