Kenmore 63942 Dryer "run unless hold" Questions

...run unless you hold the start switch down, even then however it will stop running after a few seconds of holding the switch down. The timer runs the door is shut good but i do not know what i can do ...

...Runs as long as you hold in the start button. The dryer will come on and run until it gets to a certain spot in the timer. Then it will cut off unless you hold in the start button. Replace the

...Run unless hold start switch The Dryer wont run a cycle unless you consistently hold the start swtich down. I already replaced the switch so it is not that. ??? You most likely have a faulty motor ...

...unless I will Hold it to On position. when I release it it will stop.in other words it will not hold to Run position you could have a bad motor. the motor has an internal switch that is stuck in the ...

dryer willnot stay running dryer willnot run unless I hold start button what should I check The start relay itself seals in and keeps you running.

...run unless we hold the button we need to hold the button to run the dryer and not sure if it's some kind of sensor problem. there is heat coming out when we hold it down so I'm not sure what the ...

unless you continue to hold the start button in. No unusual sounds such as belts worn or drum off balance. Checked vent, that's clear. Checked door button (holding it in while attempting to start), no

...run unless the start switch is held down. It was pressed down through many cycles until it stopped working entirely. I found that the thermostat was broken so I replaced it and it started running ...

...teh belt on my GE dgas dryer. The dryer will start but will not continue to run unless we hold the start switch in the on postition check the start button, if it runs with a jumper, the switch is ...

...run unless I hold the start button, runs fine if I hold the button down Check the door lock switch to see if it is working. Or possibly something called the relay which would be likely more expensive ...