Kenmore 75503 Stainless Steel Dual Fuel (Electric and Gas) Kitchen Range "replaced oven sensor broiler starts" Questions

...F3 or F4 Open or shorted oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is

...oven temperature sensor (RTD) that should be replaced. Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. Please ...

...oven until the panel is replaced, he checked the probe and it is o.k. Hi katnbiff – This is typically something that a professional would need to diagnose. Possible causes could be a faulty EOC ...

replaced the oven ignitor and no help, when I turn on the unit for self clean the boiler goes on normally and starts to self clean this works normal,then I cancel , this unit has clock panel with self

...is 5 years old, so there is no warranty, and I have gotten little help from Sears.... F3 Oven too hot Replace oven temperature sensor it also sounds like you need a main control too..hope this ...

...replaced Electronic oven control assy...It works correctly, but never gets Hot!! Any ideas?? Having a problem with the stove on this Jenn Air svd48600b. Often with the oven warms up to 350F it starts ...

replaced in July 2008. Now the oven temp will not heat higher than 350 deg and must press down arrow to start, plus the broiler works only on low and must also press down arrow. Is it practical to pay

oven sensor ( WB21X5301) is suppose to tell the oven control when to turn on and off to reach and maintain oven temp, but before you go replacing it, try to observe how long it takes from the time you

...oven has two ignitors, one for bake, one for broil. It mounts with 2 quarter inch screws. Part number WB13K0003. Not a hard job to replace. Catriver..post back. I agrre with the posibility of a ...

replaced the oven ignitor and no help, when I turn on the unit for self clean the boiler goes on normally and starts to self clean this works normal,then I cancel , this unit has clock panel with self