...SET THE TIME, ETC ON THIS WATCH.? ANALOG TIME Pull CROWN and turn to set HOUR and MINUTE hands. TIME AND DATE A. Press and hold SET. SECONDS digits will flash. B. Press SPLIT/RESET to set SECONDS to ...
...set the time on your watch. Water-resistant watches have a screw-type crown, and the screw must be turned toward the body (unscrewed) before it can be pulled out for further use. If the watch is not ...
...turning the crown clockwise. Continue to screw in the crown until it is tight. You will need to unscrew the crown (counter-clockwise) before pulling it out the next time you want to set your ...
...set the time? PRS 516 Quartz, Chronograph. So can I swim with it?... (never mind the leather strap) Will it survive going into the water? For how long? hi its a bit of a grey area as some cheap ...
...set time. Pull the crown out the to next click. This is the time setting mode. Set the time by turning the crown clockwise until the day or date changes to the current date. This is the a.m. mode. ...
INSTRUCTIONS FOR SETTING UP A POD 510 WATER RESISTANT MENS TIME WATCH my pod watch will not restart,it's frozen,also can't find instructions so I can set correct time.
...pull out the stem on my Pulsar watch to set the time. Any suggestions. Because your timepiece is water resistant to 100m, you may have to unscrew the crown before pulling it out to set the
...set a Aqualite field ranger (30M water resist) watch I seem to have ONLY military time Usually, and yours may be different, but usually you are prompted with a choice of "12" or "24" hour time when ...
...set the time: Press and hold Mode until it flashes a time and the letter A . This is how you set the alarm. Press mode again and you can set the time. start stop button moves between seconds, min., ...
1 questions posted
Usually answered in minutes!
2 Questions
1 Questions
4 Questions
1 Questions
