Brother IntelliFAX 775 Plain Paper Thermal transfer Fax "set number rings transfer phone" Questions

...set up go to tools menu then select run fax test,all entries should be pass >then check your connections, do you have one line or number for your fax and phone?or a separate line or another number ...

...number of rings before Brother switches to fax? Our phone/fax only rings four times before it cuts over to fax reception. So we really have to rush to catch our calls. Scotty07 Press fuction key and ...

...number. I suspect it's either not set or set for the wrong ring pattern, and is answering the phone before you do when people call. Once the fax machine is set for the proper ring pattern the problem ...

...number after the beep." It sounds like the kind of message that is usually standard on an answering machine before someone records their own message. My own recorded message is still on the unit, but ...

...number of rings you have set for the Ring Delay. When the Ring Delay is completed, the fax machine will answer the call and determine if it is a fax call or a telephone (voice) call. The fax machine ...

...number rings, switches to a fax tone and then stops and prints a transmission report that says line is NG. I tried pressing the "fax start" button, but that switches the machine to receive mode. I ...

SET UP FOR DISTINCT RING, A DIFFERENT PHONE NUMBER AND TAUGHT TH MACHINE THE RING. I CALLED HOME TODAY (MY REGULAR NUMBER) AND ABOUT 10 SECONDS INTO THE MY CALL THE DISTINCT RING IS HEARD IN THE PHONE

set the fax to respond to the designated ring tone only. It interferes with the house phone. Both are on one phone line with two different nunbers. Its called distintive Ring. This is the instructions

set up--or it is broke. Ringer makes sound when setting the volumn. Was working until we move it to another location. Got the manual if that would help. Any ideas? Can you fax out? if not, look at the

...set the number of rings before the fax kicks in, or a press 1 for fax now, or 2 to leave a message??!!! your help would be greatly appreciated! thanks katrina You CAN set the number of rings on that ...