Brother IntelliFAX 2800 Laser Fax "document feeder jam" Questions

...document feeder, it doesn't always grad the page, and if it doesn't get it, it acts like it has a paper jam, what is causing this? Open the document feeder. Inside you will find a grey feed roller. ...

...document jam'' (top feeder), but there is nothing in there. It won't copy or fax, but it will print. check the photo sensor for the paper fed at the doc feeder roller section you can blow this out ...

receiving confirmations indicating document jammed although the recipient confirms receiving. How can I correct this. Open the document feeder and look for a switch actuator stuck in the down position

document feeder. I have seen several times where the left hinge ( when looking at machine from front) does not close all the way. Close the adf and look at the gap between the copier and the adf. 

...document feeder. Is this problem with the main board or the document sensor.In maintenance test # 32 this switch is detecting. Check the left hand side rear hinge on the Doc. feeder. If it is broken, ...

...I think the document jam is there. Pl. check the ADF (automatic document feeder) a small piece of paper or any foreign mater may obstruct or jammed at the sensor. clearing this may help you.

...document feeder jams. When you open up the doc feeder and look inside the machine you will see a roller and above it on the cover that opens you will see a rubber pad. Clean both the roller and pad ...

memory . If the document doesn't feed out, remove it as explained below. Important: Do not try to remove a jammed document without releasing it as explained below. This may damage the feeder mechanism

Document Feeder Jamming. when trying to make copies, the paper keeps jamming in the document feeder. When we clear it out, it continues to jam. We found that if we put a little bit of pressure on the ...

...date/time. Once you have the regular screen load the document on the feeder, the display should change and should ask you to enter the fax number. Hope this helps! Please rate if it worked, ...