Brother IntelliFax-2820 Laser Fax "sensor adf" Questions

document feeder reporting paper jam when there is nojam The ADF need to be serviced the sensors are detecting the jam which you can not see. 1. maybe there is a very tine piece of paper inside ...

...up to open) there is a small plastic sensor that dangles in the ADF, sometimes it gets push up and if it does it will give you this error. either you or a tech need to take it appart to fix the ...

...sure no piece of paper is in it. there is a small lever in the adf this is the sensor it should be able to move freeely and have a spring action, is it stuck? are the guides set, and set to

fax not going through when I hit send it says send G3 1/1 Check sensor flag at ADF and CLEAN the ADF roller(s) and separation pad.

...adf door. The door is closed, I have turned it off, unplugged it and am still getting the error code. In this case make sure that the plastic tab that actuates the sensor is not broken off. If it is, ...

Our fax is not feeding through paper and seems to just say 'Set Document' when actually document is set. the sensor actuator on the Adf is out f postion try to fix it welll or the sensor is faulty

I have tried to go to maintenance mode and checked everything but still getting the same error Dear Miro Pl. check the ADF section any of the sensor may clogged. At least two sensors are there. thanks

...paper. How do I remove the ADF mechanism to reattach the sensor. Here is the service manual it should help : ...

...ADF. I have shut off printer and looked for a jam and found none. look for a "flag" type sensor, it is an arm that the document pushes against and in turn moves a flag that normally interrupts an ...

...adf Check the document feeder is it aligned properly. There is a small magnet and sensor magnet on the Document feeder right front sensor under the plastic that side ensure they are aligned. Does ...