Brother LS-1520 Mechanical Sewing Machine "set" Questions

...came out now the left needle does not stay in Assuming this is a serger? Is there only one needle set-screw on the machine or one set-screw for each needle? If there are two set-screws, then you

tension factory settings for Baby Lock serger Model BL400 The tension settings were changed on the serger. What is the correct factory setting for the dial # on the front of machine and for the stitch

How do you change the default stitch length. I have set the length I want and press and held the default button but it will not change. The machine constantly moves from my setting to the default ...

What stitch setting do I use for a satin stitch? Depending upon the machine, whether it is electronic or a manual setting, most settings for satin stitch are shown as a zigzag with Length being the ...

Tension setting for straight stitch on husqvarva topaz machine How to set tension on husqvarna topaz 50 machine The standard setting when the machine leaves the factory is the midway point between ...

What is the normal tension settings for normal 4 thread overlocking Depends on the Brand and Model. On my Bernina 1150, if the tensions are set in the middle, it is usually a good tension setting. ...

stich setting what is the basic stich length setting for this machine It is usually 2.5 or mid-way between 2 and 3. Set it longer - closer to 3 when stitching thick fabrics. Make a sample of the ...

My Kenmore sewing machine model number is 17630, & when I try to set the stitch length from a Straight Stitch setting to a Straight STRETCH Stitch setting, there isn't any difference. I have the ...

Setting tensions on a 928 Nelco serger, I had a couple little hands turn the tension knobs and I cannot remember where they need to be set, I have some notes to set at 3333 but not working....... The ...

dont know how to adjust the settings Kenmore 158.16600 didnt come with manual.How old is it. hi there, follow this set up of thread as shown on figuresthe set up of bobbins thread wind should be ...