thread guide, located just beyond the machine's handle. Lead thread through the second upper thread guide, found a few spaces to the left of the first upper thread guide mentioned in Step 2. Bring
thread guide, located just beyond the machine's handle. Lead thread through the second upper thread guide, found a few spaces to the left of the first upper thread guide mentioned in Step 2. Bring
...guide the thread through one of the two thread guides on the thread guide bar. The thread starts from behind the guide. (The post holding the guide bar is next to the spool pin.) As with most sewing ...
...thread guide (number 1)Pull the thread down and under (from right to left) the tension discs. (number 2)Hold on to the spool of thread to create tension on the thread, and pull the thread so in puts ...
...thread guide thread guide tension take up lever thread guide thread guide needle The number of thread guides may vary among machines, but this is the basic for all machines I've encountered. and by ...
Question about Sewing Machines
...Guide the thread through each and every one of these thread guides. 3. Guide the thread through the tensions assemble. 4. Guide the thread through the needle take up lever. This is crucial 5. Thread ...
...thread guide. But the guide does not hold the thread at all. The thread simply slips beneath the guide and totally loose of it and then below the second set of guides as well. When I try to sew with ...
Question about Sewing Machines
...Thread guide Thread guide Tension Take up lever Thread guide Thread guide Needle. There may be an extra or one less of the guides but for the most part I've been able to thread any machine. Good luck ...
thread guide bar and into the guide near the check spring. Then bring the thread up and through the take-up lever. Bring the thread down and through the thread bar guide. Next bring the thread through
thread guide on top sometimes and it guides the thread onto the bobbin very crooked and I end up having to hold and guide the thread onto the bobbin with my fingers. This machine does not have a screw
97 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions