needle holder cannot be turn to the highest point I unfortunately broke 2 needles. i successfully took the needles out and when i was about to put the 2 new needles- i cannot put it as the holder ...
...needle was put in the needle holder correctly and tightened into the needle holder correctly.. if the needle was in the needle holder correctly and it's still hitting the bobbin carrage then the ...
...holder screw, remove needle making note of the direction of the flat side if your needle has one. Put new needle up there as far as you can get it... tighten down the needle holder
put it back in but its fighting me. can you help me with this? Make sure the needle is in the highest position before you try putting the bobbin holder in. The bobbin holder has a metal 'finger' which
Question about Brother Sewing Machines
needle holder by on brother sewing machine xl 5030 The needle clamp pin is inserted before the screw is inserted. This allows pressure to be made on the needle. The needle holder is held on by a screw
Question about Brother Sewing Machines
...put back the needle. Good luck! if you live in a small town as i do then there are sewing stores, maybe around your area? they usually would be more the helpful, if not then call the customer service ...
needle broke, now the bobbin holder will not stay put and the thread gums up what do i need to do If the bobbin case/holder is trying to lift up and the thread is staying partly around it, your bobbin
...needle was put into the needle holder correctlyall the way up into the needle holder--flat side of the needle to the back side of the machineif the machine still doesn't up the bobbin thread then ...
...There should be a J shaped part which goes into a hole on the bottom of the assembly. Reassemble everything,put the assembly back on the needle bar and tighten the screw with an allen wrench. ...
97 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions