...seems to be feeding at about a 10:1 ratio. Printed out the machine manual, and used the troubleshooting section to fix the problem, which was that the top thread was not properly routed to the
...10-how-to-fix-tension-on.html Incorrectly threaded machine: Did you use all thread guides? Did you thread with the presser foot down,which would keep the thread from slipping fully between tension ...
...10. ALWAYS MAKE IT A HABIT TO CHANGE THE NEEDLE AS A FIRST CHOICE FOR TROUBLESHOOTING. Hi Carl, Do you have the correct bobbin in the machine? When you first start sewing pull both the top thread and ...
Question about Yamata Sewing Machines
...needle. Thread type... Use a heavy grade Nylon thread that is for upholstery. Note use the same in the bobbin...adjust bobbin tension to match the heavier thread, if necessary. Stitch length... use a ...
Question about Husqvarna Sewing Machines
...10 stitches per inch. This stitch is long enough to actually move the fabric. If the stitch length is set too short, the fabric will stay barely move and the needle will stitch almost in place. Check ...
Question about Sewing Machines
...10'. I can feel a little pull and then the tread breaks/ Bobbin Thread Breaking How to Loosen Bobbin Tension Why Is My Thread Breaking How to Avoid Thread Breakage at Your Sewing... Bobbin thread ...
Question about Singer Sewing Machines
...10 it is incorrect threading,,, Re-thread the machine make sure to use every thread guide check to see if the bobbin is in correctly and you are using an appropriate needle for the fabric and thread ...
...10 years the needle will not move up and down. It will go side to side. It stopped while sewing and won't restart. I have checked all of the common troubleshooting things on the machine and none of ...
Question about Sewing Machines
...needle, like a #70/10. If your machine has a presser foot pressure setting, you may want to adjust that as well. Understanding Thread Tension Threads ...
...10 years. The last time a try to make a ruffle but I can't do it anymore. Could somebody know what can I do to fix it? I have a eclipse lx baby lock serger model ble1lx . the problem I have is broken ...
222 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
150 Questions