Brother LS-1217 Mechanical Sewing Machine "shuttle race problems" Questions

shuttle race cove out by the center pin. 3. Clean the shuttle race of any lint or small particles of thread with a small brush. 4. Put a drop of oil on the center pin of the shuttle and on the shuttle

...the needle to it's at the highest position and set the race hook into the shuttle so the hook is at the lower left. Re-place the hook race cover and move the levers or pegs to hold the cover in

...Other wise you run the risk of loosing yr motor. Your problem is due to something getting jammed in yr bobbin compartment. Clean shuttle race and shuttle race free of lint regularly to avoid

...race/shuttle, still holding the lever out. Align the finger on the bobbin case with the opening in the race/shuttle. You may have to turn the bobbin case a bit to the left or right for it to line up. ...

...shuttle race I was sewing along fine for about two feet, then the needle jammed and had to be taken out. I cleaned the shuttle race and put it back in the machine (according to illustrations on p. 39 ...

...shuttle race cover. It has a black ear on the right and a black ear on the left. Push the right ear to the right, and the left ear to the left and the silver ring should come out. Behind the silver ...

...shuttle race cover. It has a black ear on the right and a black ear on the left. Push the right ear to the right, and the left ear to the left and the silver ring should come out. Behind the silver ...

shuttle/race/bobbin system shouldn't really be taken apart by the average user. Unfortunately, your chances of ever getting it back together properly so the machine will sew (this is the timing of the

...race running surface anyway before replacing the hook/shuttle. If the machine sounds noticeably quieter and/or the stitch formation looks better, you'd be advised to do this every few ...

...shuttle race. Remove any loose threads or lint in the shuttle race. You could be holding the needle thread too tight. Hold the thread lightly to keep the end from going down into the shuttle. The ...