...bobbin We have two Kenmore 16782 machines and both are jamming badly in the bobbin casing. I have changed bobbins, needles, re-threaded, vaccuumed and cleaned many times but the problem continues. ...
...bobbin case where you drop the bobbin into? That part is not supposed to turn. The metal ring (the hook) below that is what turns. I'm assuming you are having a stitching problem. First check the ...
...bobbin case. Not sure of the exact model, I inherited this machine. The needle thread goes in, gets picked up, and makes the loop. Sometimes it picks up the bobbin thread, sometimes not. Each time ...
...be cleaned of lint and dust in this area or your needle is bent. I would do the cleaning and install a new needle. Also make sure that your bobbin is sitting properly and tight in its case. Good
...Bobbin case is on p. 29 of the manual: http://www.fixya.com/answer/answerpageslideview.aspx?ctg=164&fml=0&brd=mine&p=3&thid=23370053 Disassembling, cleaning and reassembling the ...
...bobbin case tension. Also I took out the shuttle case, cleaned it,put it back togeather. Now I'm stuck........Help Sounds like the timing adjustment of the bobbin case has been upset. Have that ...
Question about Kenmore Sewing Machines
...Bobbin shuttle cleaned, reseated, area oiled and cleaned; needle changed and re-threaded; different bobbins tried with no difference; shuttle case is free of burrs and is clean and seated properly. ...
Question about Kenmore Sewing Machines
clanking sound and all the bobbin thread gets snagged up around the bobbin case. you will need to get a new bobbin case assembly from singer as your bobbin lock lever has broken off; (a common problem
Question about Kenmore Sewing Machines
... it was working fine until i got some thread jumbled up. i cleaned out the bobbin and shuttle case and its still not working try a new needle make sure the bobbin is turned in the bobbin case ...
bobbin case and rethreaded everything. Undo the screw on the bobbin case anti clockwise about a quarter of a turn and test and repeat if necessary until you get it right, put the top tension on 4 or 5
126 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions