Question about Janome Sewing Machines
...walking foot on the needle hits on the back of the foot.Janome 4800 memory craft I have tried a new needle and still hits the back of the walking foot a little bit I have broke two needles.I just had ...
needle plate, it keeps hitting on something. The needle works fine by itself and with the other feet. It is on center position. What am I doing wrong? Help! Take the needle out and run the machine for
...hitting the walking foot the needle needs to be changed since it's hitting the walking footalso the machine could be out of time since the needle is hitting the walking footit needs to be ...
...walking foot off, the needle hits the foot and breaks. It only does this with the walking foot. Is this normal? thanks Yes, you have to remove the walking foot, the threading mechanism does not have ...
...this... do you notice any bobbin thread on top of the seam? If possible try suggestions given and check needle position make sure its not hitting something Adjust if possible take in for
Question about Brother Sewing Machines
...do this have you installed the correct walking foot for zig zag stitch as the needle may be hitting the foot read your user manual for problem solving and setting up the machine for different ...
Question about Sewing Machines
walking foot. New needle clamp on w thread guide, but there's no room between the needle carriage and the presser foot for the machine to complete a cycle and sew, It hits at the top. HELP!!! I'd need
Question about Brother Sewing Machines
...walking foot on it to quilt, but every time the needle comes up it hits the needle threader. It makes a horrible noise and sometimes acts like the needle is jumping. I’ve cleaned the bobbin case and ...
Needle hitting metal casing .. Singer Futura CE 200 I have the walking foot on my machine. My needle was hitting the metal casing for the bobbin. I changed needles thinking it was bent, but that did ...
...needle on my Esante seems to be hitting something the skipping stitches. I have changed needles, rethreaded, changed plates, and changed feet. Thanks Did you thread the machine with the presser foot ...
915 questions posted
Usually answered in minutes!
337 Questions
294 Questions
223 Questions
181 Questions
150 Questions