JCPenney Seiko Men's Titanium Watch "remove crown winder" Questions

...remove winder Ensure crown is in neutral position i.e. pressed home (not in set hands posn.) Remove back and adjacent to the winding stem on the movement there should be a small button (may be ...

remove the winding stem/crown. I have a Fossil AM3982, ladies watch. The numeral 2 at the 12 position has come off and is floating around. I have removed the back and the plastic insulator exposing ...

...crown be for removal? What point exacty should be pushed or unscrewed to remove the stem to be able to remove the movement? I can send a photo of the inside back of the movement where you could put a ...

...winder knob) for a piece of plastic used to keep the stem from being all the way down to start the watch. Remove that small piece of plastic, press down the crown and the watch should start. ...

crown will not push back in completely, it stays out in the first pull position Sounds like the setting lever has disengaged from the stem detent. If you can remove the back off the case you may be ...

...referring to are the stem and crown. on most watches once remove it cuts the power so u can set. take it to a jewelry store. the parts are inexpensive and most store with a desent shop can replace ...

...crown (winder) and you have to unscrew it prior setting hands or date. Screwdown crowns are very nice feature as your watch gets very good water resistance, just don't forget to screw it back on. ...

...remove the winder from Pierre Cardin Diamonds watch? I think the waterproof seal has perished and have condensation on face that needs to be cleaned off. There appears to be a 'collar' at the ...

...winder in neutral position i.e. pressed all the way in, turn the crown (winding button) and if it spins freely it's probably quartz. Because unless it's broken most mechanical watches click as the ...

...crown (winder) remove this piece of plastic carefully and push the crown back down to start your watch, if it's an automatic movement, try to wind with the stem if you feel a resistance then winding ...