Baby Lock Imagine "needle go" Questions

Ad

...go through the needle hole isn't going through the needle eye. Hello Mim Carpenter The needle threader on the Creative Vision 5.5 requires that the needle be in the full "up" position and in the the ...

Ad

Question about Brother Sewing Machines

1 Answer

NEEDLE GO THROUGH IT OR NOT? PLEASE ANSWER.THANKS! check that you have the correct needle some machines use a needle with a flat side that correctly aligns the eye with the hook and others just have a

Ad

Question about PfaFF Sewing Machines

1 Answer

...go and tighten the needle clamp screw." "Removing Needle: Unplug the machine. Turn the handwheel counterclockwise to raise the needle bar to its highest position. Loosen the needle clamp with the ...

Question about Singer Sewing Machines

1 Answer

the needle keeps breaking and the thread wont stay threaded. the needle is not going straight up and down but it goes down and gets stuck almost usually a 3-5 inch thread tail is helpful to keep the ...

Question about Juki Sewing Machines

1 Answer

...go,then tighten the needle clamp screw also make sure the needle & thread will work togeather Cut 6-8 inch piece of thread of the spool you are going to use for your project Take the needle you ...

Question about Husqvarna Sewing Machines

1 Answer

...needle go towards in a 215 model? the flat side should face the back of the sewing machine here's a tip I learned about needle & thread compatibility from a needle & thread expert . Cut 6-8 ...

...go, then tighten the needle clamp screwCorrect needle insertion is mandatory for proper use of sewing machine.Raise the needle bar to the highest point, then loosen the clamp screw to remove the old ...

Question about Brother Sewing Machines

1 Answer

...knob on the side has the line at the top), and I tried making sure the needle was pushed up, and it does go all the way up to the needle stop. The needle needs to be replaced, it is not seated ...

Question about Husqvarna Sewing Machines

1 Answer

I am sewing a quilt and my needle is in the right place but it keeps breaking. Please help. Also, the thread break often. here are something you might check upper thread breaks 1.top tension to tight ...

...needle cannot go through a whole cycle. Not sure where to even start. indicates that the needle /hook timing has altered and needs resetting Hmm, even if the timing is off, the needle should still ...

Not finding what you are looking for?
Sewing Machines Logo

157 questions posted

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Chris Wetmore

Level 2 Expert

190 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

tsalagi152

Level 2 Expert

89 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...