Bernina Bernette Deco 600 "embrodiery machine" Questions

embrodiery) module. Once I removed it, replaced the needle, feed dog, and bobbin the machine no longer will sew. The thread (upper and bobbin) is threaded correctly... I am *stumped*! I have a Janome,

not regonizing embrodiery frame the problem could be the computer or a sensor, the machine may need to be serviced

...embrodiery machine will not communicate. Also I have not used the machine in two years and now the identification code is not recongized. it does not work with the newer computers is have the same ...

...machine Viking #1+, have couple od pre-programmed cards that are corrupted. how do i convert them into programmable?? thank you, maria you cannot convert a #'d embrodiery card collection to ...

need replacement dongle 5D embrodiery Call your Husqvarna Dealer

why does my simplicity 3 embrodiery bobbin keeps bunching up under the plate You might need to clean out the bobbin case. If there is lint, dust, thread bits, etc. in there that can cause your problem

...embrodiery machine Error reads main motor error and needle position erroe You may have a bent bar inside the machine (big trouble), needle error is easy it is just to wind the big nob at the back of ...

...embrodiery machine and the stitches won't catch. I had this machine serviced before I moved from SD to an eastern state. It was sewing fine and just started making a noise like it needed oil and the ...

machine will sew but when I attach embrodiery part it flashes 88 and all buttons flash please help That is usually caused because the needle is not all the way up. CEs are very sensitive to that. Also

...embrodiery the other day and the machine ate the material. It was caught under the needle so i had to cut it out and now everytime i get ready to embroidery it does the exact thing. I have rethreaded ...