Bernina Activa 130 "normal stitch width length" Questions

...stitch guide to "normal," "zigzag," or "overcast" mode. Have you also turned the stitch width lever to 3 or 4 to form a swing needle type stitch? Is this a Lotus SP or a ...

...out as a normal stitch, any ideas? Misty Make the stitch width wide and the stitch length very short. It will take a bit of practice with the widths and lengths but you will get it. Good luck. ...

normal straight stitch is "width" set to zero and "length" set to 2.5. If the machine has several different stitches then there may be a "stitch selector" too where you can choose the stitch style, ie

...stitch length, width etc.)? Width is one. Length depends on the thickness of the fabric; 2.5 is the normal setting, but you may have to adjust to your liking or the age and condition of the machine ...

Normal sewing setting Stitch width set to zero, stitch length set to 10 or 12 stitches per inch. (No decorative designs should be selected.)

...stitch dial for the length is located all the way on the right side of the machine and is factory set at the setting "3," which is a 3mm or 1/8 inch length. Turn the dial up or down to adjust the ...

...stitch, it is only stitching the left side. I have a size 11 needle in, width is on 2 to 3, length is on 0.5. Please help! if the fabric is thin then it needs something with it to make it strong ...

...Stitch Width - Normal to Wider (your choice) Stitch Length - 1 mm/left needle; 0.5 mm if using the right needle. Differential Feed - Normal Blade Position - Up Right Needle Tension - Tighten Lower ...

...normal setting for a 4 thread overlock and test stitch.  On mine, that is 5 on all the tension dials, stitch length 2.5 (dial over by flywheel) and differential feed on 0.I hope this helps you, ...

...Normal top stitch is where you might be stitching a facing down on the outside of a neckline, so you might want to stitch about 5mm away from the edge of the fabric.  Always stitch from the ...