Bernina Artista 180 "top thread tension" Questions

...top thread tensioner is engaging. After threading top thread, with presser foot up, rotate tension selector to 4. Then move presser foot down (this engages top thread tensioner). Make a slow steady ...

...top thread keeps getting wound up in huge knot in the bobbin area Top thread nesting on bottom side is likely either top thread has escaped tension plates or tension too low. Try increasing tension. ...

...top thread issue. Be sure to install a brand new needle. Remove the top thread from the machine. ALWAYS RAISE the presser foot and rethread the top thread. Set the top tension to the mid-point and ...

...top thread tension too loose (no tension) but can be bobbin thread tension issue. Be sure to thread per machine instructions. See following Singer video... testing top thread tension. ...

...top thread tension. To check top thread tension, move presser foot up, then make slow steady pull of the top thread. The thread should advance smoothly without hesitation since raising the foot ...

top thread next to the spool. Raise the presser foot and pull the clipped thread DOWN through the needle eye. (Always remove the top thread in this manner. NEVER pull the top thread up!!!) Now, ALWAYS

...top thread from the machine. ALWAYS RAISE the presser foot and rethread from the beginning. Verify the thread path is correct. Set the top tension to the midway point and then tweak it so the top and ...

...top thread tension is too high or there is too little or no bobbin thread tension. Be sure the bobbin thread has not escaped the bobbin thread tension spring. If the bobbin thread is in its tension ...

...top thread tension or top thread feed issue. Be sure needle isn't barbed at tip. If your machine has a horizontal spool pin, be sure the spool cap is larger than the spool and the thread unwinds from ...

...top thread from the machine. ALWAYS RAISE the presser foot and rethread from the beginning. Set the top tension to the midway point then test the machine. The optimum tension is achieved when the top ...