Elna 1010 "lower looper thread keeps unthreading" Questions

...lower looper keeps breaking thread Hi,...if the lower looper thread is breaking before you sew six inches or more then I suspect a threading problem.When the lower looper thread breaks, You MUST ...

...Which thread, needle threads, or looper threads? If looper threads, be sure to unthread both loopers and retread in correct order, 1;2;3;4: be sure upper looper is threaded before lower ...

lower looper I have threaded my machine properly, I think, but the lower looper keeps coming unthreaded. I have rethreaded about 10 times very carefully. each time it lock stitches for 1 second and ...

...lower looper keeps coming unthreaded, but this doesn't happen until I put material in. I have rethreaded it a million times to no avail. Also, where should the upper looper thread lay in relation to ...

lower looper keeps breaking. Is there anywhere thats has the threading guide? I know the order but need to make sure I'm starting it right at the top. Thanks I have a baby lock BL4-436 I just got at a

threading order My lower looper keeps unthreading as I sew. Is this a threading order problem? try having longer thread tails and keep them pulled to the back of the serger

Lower looper cotton keeps breaking Usually it means it is not threaded correctly. Remove ALL the threads from your machine. Be sure you RAISE the presser foot when threading. ALWAYS thread in the ...

...lower looper (the 4th thread). Although, of you keep the tension low-below 3 or so, you should be ok. If these tips don't help, I would also check your cutting width, if your machine has an ...

...and now the seccond thread keeps breaking after only a few stitches. I have lost the chart to tell me which order to thread the machine in. Thread the needle last.Thread the lower looper first. ...

...lower looper thread keep breaking? I'm sewing on two thicknesses of fabric. Usually, thread breakage is due to incorrect threading. When a thread breaks or becomes unthreaded, the best policy is to ...