Elna 2007 Mechanical Sewing Machine "oil bobbin winder" Questions

...oil the area where the bobbin winder shaft goes through the bobbin winder assembly. You might need to force the winder to turn with your fingers for a while, but it will begin to turn smoothly once ...

...bobbin winder may be frozen. Add a couple drops of sewing machine oil then let the oil penetrate for about 5 mins. Get a pair of pliers then carefully and lightly turn the bobbin winder until freely ...

...oil, put top back on and bobbin winder does not work. 1. Take the top off. 2. Check to see if the bobbin winder has pressure as you move it back and forth. There should be. If not then check for a ...

Bobbin on Bernina 807 won't wind? Please follow the logic checks and possible corrections: 1. Check the winder shaft for a sticking or a stuck condition. If stuck or sticking, add a drop or two of ...

...bobbin winder, despite the oil I'd given it. Once it ran long enough, the oil worked in and the gunk worked out, and then it was fixed. Looking back, there was no reason to remove the duct tape from ...

...bobbin winder won't disengage. when you press the pedal down the needle doesn't move but you can hear the bobbin spinning but when you put a bobbin on the bobbin winder it doesn't move at all. Any ...

...bobbin winder may be frozen. Add a couple drops of sewing machine oil then let the oil penetrate for about 5 mins. Get a pair of pliers then carefully and lightly turn the bobbin winder until freely ...

bobbin winder stopped working , It doesn't turn to wind the thread Either the winder rubber has worn down, or there may be some residue on the winder rubber, ot the winder may have seized through lack

...oil on the the metal shaft of the bobbin winder if it is not moving freely. The grinding noise implicates the winder tire may be ground from the locked winder shaft. The needle not disengaging ...

...oil the shaft of the bobbin winder. Try not to get oil on the rubber wheel. If this is an older machine (817,801,810 ) the wheel might have to be replaced as they get hard and will not grip the hand ...