Euro-Pro 534DX Mechanical Sewing Machine "blade" Questions

blades will not cut A few things to check here; 1. do the blades cross over each other when the upper blade is fully down - if not make sure lower blade is flush with top of needle plate and then ...

How to replace the upper cutter on the baby lock? which screws to release the old blade? I also have a babylock eclipse BLE1DX serger & here's how my book says to do it to replace the upper ...

How to disengage blades on a singer serger Usually, the upper blade flips up and out of the way. Sometimes pushing in on the blade and rotating upwards will work, otherwise the manual should have ...

if my machine is not cutting right do I need to replace both blades not necesarily, can you see a knick in either of the two blades? use a magnifying glass and see if you can see any damage first. ...

overlocker the blades wont cut where can i but new blades You may be able to find a replacement blade. Search the internet for: Make + Model + the word "blade" or contact manufacturer support. Most of

I am having trouble with loose stitches and my fabric is not being cut by the blade. I have t Cleaned my machine , rethreaded me serger a few times , I have adjusted the tension , I am traveling and I

I have a Babylock 5260 serger and have changed the blades before but this time when I changed them I can't get them to align correctly. the top blade comes down and hits the bottom blade. I cant ...

...or thread. I need to know the correct placement of the cutting knives. First to see if the top blade is pressing against the lower blade when it goes past to make the cut. You should be able to ...

replacing cutting blades on Bernette fun lock 007d Normally, only one blade on a serger can be replaced by a user (assuming a replacement blade can be found). If both blades should be replaced, then a

I have a babylock evolve serger. It serges fine w/o the blade engaged. Once I engage the blade, the stitches don't hit the fabric When I serge, it works fine. The stitches are perfect. When I raise ...