...presser bar screw on top of the presser bar, if you have a dial turn it to 0, you should now be able to move the lever, if it is still tight put some WD40 on the presser bar and leave it for a couple ...
...with broken presser bar clamps (something inside the head). If it is just a bind then some oil on the presser bar may work, if the clamp is broken then it is probably not worth fixing. Good
...apart to the point where you can see the pivot point for the presser bar lifter and spray WD40. Let sit for a few hours and try again. Repeat until the presser bar lifter releases. Sewing Machine ...
Question about PfaFF Sewing Machines
...of the lifter the foot won't fall back down..will come down if you gently pull it Sounds as if the spring for the presser bar is broken OR the presser bar is dirty and needs cleaned and
Question about Juki Sewing Machines
...presser ft. the lifter bar connected to the knee lifter can be bent to line up with the bar on the machine. go to the other side of the machine and look in thru the oil pan to see how they match
Question about Sewing Machines
presser bar lifter? I ordered a replacement part, but now I don't know how to remove it. How do I change a pfaff 1222 presser bar lifter? I ordered a replacement part, but now I don't know
...presser bar lifter on my Lily 540 broke and now the presser foot stays down permanently. The plastic portion of the lifter (the lever) that is located on the outside of the machine is intact. It is ...
Question about Singer Sewing Machines
...presser bar lifter & lift it up, if you look close it has a small notch under the front place the all purpose foot down under the presser bar, make sure the presser bar notch get on to the pin ...
67 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: