Husqvarna Lily 540 and 550 "jeans ma jig" Questions

Ad

Question about Singer Sewing Machines

1 Answer

jeans and the material was too thick. The needle would not go, now the bottom thread will not sew from the bobbin and the plate that the bobbin is in willnot turn likr it is supposed to, what do I do?

Ad

Question about Sewing Machines

1 Answer

...thick seams, then you need to lift the fabric at the back of the needle to make it lie in a straight line. There are gadgets to help like the Dritz Jean-a-ma-jig. Also use a large needle, 16 or

Ad

...on the edge of seams Sounds like the corduroy is too thick to pass comfortably under the presser foot without the pressure foot tipping up. A "Jean-a-ma-jig" will help jump the bump, Dritz make

Question about Sewing Machines

1 Answer

ma-jig which is just a piece to keep the needle level. A piece of cardboard 1/4" thick will do the same. It has to be behind the presser foot. Also, make sure that you have a 14 or 16 needle. In other

Question about Elna Sewing Machines

1 Answer

...to do it. You can try usinf a seam jumper Sometimes called a jeans-a-ma-jig, this helps give leaverage to the feed dogs as you approach the side seams. Also, belt the seams flat with a hammer

Question about Juki Sewing Machines

3 Answers

...jeans. When I get to the inseam where the material is super thick, the needle often breaks, bends or the thread breaks. What should I do so this doesn't happen? Thanks. Are you using the correct type ...

Question about Singer Sewing Machines

1 Answer

...jeans that need hemming, just sitting in my sewing room. Sigh....... Anita The problem happens when the thickness of the fabric being sewn is uneven. You need to raise the rear of the presser foot so ...

Question about Singer Sewing Machines

1 Answer

...it is denim or canvas there is a gadget called a jean a ma jig, sold at JoAnn fabrics that lets you sew over heavier seams. You didn't give really enough information to really be able to

Question about Husqvarna Sewing Machines

1 Answer

...ma-jig which could help. Or sew up to the seam, leave the needle in the thread, lift the pressure foot, then insert a thick piece of card from behind to make the foot level with the seam, lower the ...

Question about Singer Sewing Machines

1 Answer

...jeans I am trying to hem a pair of levi's and I can't seem to get the machine to sew over the thick seams. How do I do this? You didn't mention your model, but there is a small jig you can buy that ...

Not finding what you are looking for?
Sewing Machines Logo

67 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...