Question about Brother Sewing Machines
screen is blank and it is beeping. Please help Check that the LCD screen adjustment has not been dimmed or darkened. If that is not the case, then a component is or has most likely failed. ... Brother
LCD screen blank Just had BLQC2 serviced because LCD screen blank off and on. Repair said nothing wrong, worked for him. It is again blank. Any ideas? Thanks u need to tune it in to ur channel
screen is blank I put a new embroidery memory card into my machine. the LCD screen went blank. I turned off the machine and removed the card. I turned the machine back on and the screen is still blank
Question about Brother Sewing Machines
...screen go blank in the middle of embroidery pattern stitching? If it were a matter of the LCD screen being blank when you powered up, the likely solution would be to adjust the contrast controls. But ...
screen is blank I turned the nob back and forth and I get the data on the screen back and as soon as I remove my finger from the nob the screen turns blank There is probably an electronic problem with
Question about Kenmore Sewing Machines
my finger from the button the screen goes blank any suggestions I will guess the knob is loose; when you take pressure off of it the electric circuit inside the machine disconnects. You need a Service
Question about Kenmore Sewing Machines
...screen on my kenmore 385 19000 embroidery machine turned blank I turned the nob on top back and forth I get the dataon the screen and as I release the nob the scree goes blank You need ...
Question about Janome Sewing Machines
...screen stays blank event after waiting the boot up time Does the light come on? If so, could very well be a computer component that has failed. ... And how would you fix this if screen on but stays ...
blank screen Having turned the machine on the screen is blank but lit up time to have the machine checked to see if there is something wrong with the motherboard.. Contact Us at Bargain Box Janome ...
...screen on my XL5000 has gone blank. I have tried to restart machine but is still blank. it might just be a manual adjustment, most electronic machines have a dial close to the screen. normally above. ...
1,346 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions