Question about Husqvarna Sewing Machines
...viking model 400 and the thread broke inside and I need to get the cover off to clear the thread. Screws are either T10 or T20. There are some on the back and some on the bottom. However, would ...
Viking Sewing Machine My bobbin thread keeps breaking. I rethreaded everything and noticed that the thread coming from the bobbin was very tight so I loosened the bobbin screw but it is still hard to ...
Question about Husqvarna Sewing Machines
...viking, interlude 435...unable to solve tension problem using a regular stitch, i can pull the top thread out without any problem. i have tried tightening my tension, (both thread and bobbin), have ...
...Viking Rose bobbin winder wont release my bobbin. This is the second time this has happened with the same bobbin, and I got it off the first time by gently manipulating the bobbin. It was full of ...
Viking #1+ sewing machine My bobbin thread comes out of the bottom plate too tight, demonstrated by the fact it breaks easily, pulls hard and stitches with the bottom thread flat and the needle thread
Question about Husqvarna Sewing Machines
...Viking is to thread the machine through the needle and go under the foot then up to the bobbin winder (it has to be under the foot or it winds too tight. If it still winds too tight, lay your thread ...
Question about Sewing Machines
Viking topaz 40 Thread keeps breaking at needle. Notice tension disc on top is very loose and jiggly. How can I fix tension disc myself Thread breaking is normally caused by tension being too tight or
loose or too tight. to adjust the tension of the thread turn the small screw right for more tight, or left for more loose. Hold the bobbin case upwards and put it in to the sewing hook until it clicks
Question about Sewing Machines
...Viking Designer Ruby 25 Tension Thread Portioning Deluxe Stitch... Might be the type of invisible thread you are using. Also, some machines tend to wind the bobbins too tight for invisible thread. ...
Question about Husqvarna Sewing Machines
...Viking%201040%20x.PDF page 16 Tension of lower thread In most special sewing cases it is sufficient to adjust only the upper thread tension. Rarely do you need to adjust the lower thread tension. If ...
186 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions