Husqvarna Designer I "fix top tension embroidery machine" Questions

...machine ONLY as directed in the owner's manual. 8 Tips to Fix Birdnesting in Embroidery What causes Bird Nests Superior Threads Birds nest under the fabric big loops of thread top side looks

...top of fabric. How do I adjust tension to fix this problem? Bobbin thread showing on top side means the top thread tension is too high or there is too little or no bobbin thread tension. Be sure the ...

...and the bobbin thread is sewing on the top of fabric. This started to happen after a jam occurred. How can I fix it please loosen of the needle thread tension and/ or increase the bobbin thread ...

...top. Yet, you've obviously rethreaded so it's not likely an incorrect thread path. The tension setting could also be a problem or there's a problem with the bobbin or bobbin thread. Have you changed ...

...fix this ? Thank you Jo Ann The bobbin tension is way too tight. Adjust the bottom tension until you have a nice stitch when the top tension is at four. That means your knot is made and ends in the ...

...fix it? The stitches are not looping on the back of the material. Is the tension too loose? The machine has a tension wheel but no guide markings to jndicate tension amount. Tried turning it both ...

top tension pulls bobbin thread up too much. I changed toe tension on top but it still does the same thing. How can this be fixed? Suggest you do rethreading ,then test the stitches on straight stitch

...tension settings top and bobbin. Bad quality thread. Cotton can go rotten as it is organic. Other ideas in textual form and videos. 7 Common Causes of Thread Breaks in Embroidery Lawson Screen & ...

...fix that? I have rethreaded both top thread and bobbin thread several times but nothing works. Not completely sure on your model but you have to adjust (loosen) the tension on the top thread to match ...

fix this. Somehow the thread isn't under the tension spring. Check that bobbin! The only other reason is the top tension became too high. When you are threading the top do it with the pressure foot up