Husqvarna Designer I "bobbin stuck viking sewing machine" Questions

...bobbin is stuck and will not I have a viking 1 sewing machine , my bobbin is stuck and will not return back to sewing, any ideals? take out the parts in the bobbin area, you must have treads all ...

...bobbin stuck on rewind for viking sewing machine 545 I wound the bobbin and now I can not seem to remove the bobbin?? It should just pull off of the winder shaft. There is a small spring that sticks ...

...bobbin was stuck on the winder and I pulled it off. The black metal clip broke and came flying off. Now the machine thinks it has a bobbin on the winder and won't move the sewing machine up and down. ...

...like it it stuck in bobbin wind mode and doesn't sew. I recently had it serviced. Check near bobbing case and bobbin area under needle plate for pin or foreign object that may have gotten

bobbin to slide onto the winding pin. The little lever in the pin seems to be stuck and won't work. Help? Will a bit of 3-in1 work or do I need to take it to the repair shop? Is this a Designer 1 or a

...bobbin winder appears to be stuck on. The machine will not sew but will wind bobbins. Is this something I can repair or does it need to go to the shop? Thank you What model are you talking about? For ...

...bobbin so fast. the reason it gets stuck is because the thread is so tight on the bobbin it actually makes the bobbin a tiny bit smaller, making it hard to get off again. if you dont wind it so fast, ...

...stuck on the bobbon winder If your bobbin still has thread on it, remove it by hand and then try to pull the bobbin off the winder. http://youtu.be/mQae5jtCfbc Watch this video and you shouldn't have ...

...bobbin has stuck on the mechanism while I tried to remove it after the bobbin was filled. Have pulled and pulled and it simplyu will not come off. Thanks for your help. I'm assuming you are talking ...

...stuck and I can't get the bobbin off. I tried to get to it by taking the back screws off but it still won't come off. If the bobbin has thread on it, remove the thread so the bobbin is empty, it ...