...lever reaches the top the handwheel and the foot control wont work? Am I diong somethin wrong? The thread is right Iwatche the cd about ten times. I would un-thread and remove the bobbin and then try ...
...lever a little and it unlocks the bobbin holder, this whole dome piece will slide out and the bobbin is in it there is probably a bunch of thread around there, cut it out and pull out with tweezers , ...
...bobbin carrier and check to the right of that. There is a chrome lever which engages with slots in the plastic casing. The correct position for this is as far to the left as it will go. If it is to ...
...bobbin lever and you'll see the broken part move. The plastic part should be broken about half-way down. You can see how the part should push the white plastic bobbin winding shaft up and down when ...
...bobbin casing. 2) Correct and sharp needles correctly inserted. 3) Threads will generally feed better from the vertical position so a vertical thread stand/ attachment is recommended. 4) Before ...
53 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions
