Question about Husqvarna Sewing Machines
I am having problems with my decorative stitches. If the decorative stitch needs the "S" foot, the stitch does not sew correctly. Is ther a way to correct this? A reset button or something? Check the ...
Question about Bernina Sewing Machines
B750 Bernina what setting pressure foot and tension to use when using the 72 quilting foot with rulers Adjustable ruler foot #72 Versatile foot for ruler quilting Decorative quilt designs such as ...
Question about Singer Sewing Machines
...You probably need to widen the stitch width before it will let you sew. Or change the pressed foot to accommodate the movement of the needle when making decorative
I have a Singer model 5932 T and have lost the Special Purpose Presser Foot (J). ( used for decorative and Zig-Zag stitching). Can I buy a replacement presser foot? An accredited Singer agent/dealer ...
Question about Janome Sewing Machines
...decor excel pro 5124 I plugged it in and pushed on the foot & all it does is humm it wants to go, but just does'nt. It wont even wind a bobbin. The light comes on. Regards Kim The foot control may ...
Question about Sewing Machines
The stitch width on Bernina Artista 180 changes from 9mm to 5mm as soon as I lower the foot. Tried all the feet. Sometimes it will go back to 9mm while sewing. standard Zig zag & on decorative ...
Question about Bernina Sewing Machines
what all can l use the no 72 foot for? l have a 730 Bernina Decorative quilt designs such as lines, feathers, circles etc. are created using a ΒΌ-inch-thick Plexiglass ruler Markings on the inside and ...
...Decor Excel 5018, does anyone know how or know where I might find instructions? I think I have the thread lined up properly, put when I press the foot, the needle moves so I know I'm doing something ...
...Your screen should say 1:24 for line one, stitch 24. Make sure you are using the recommended foot. Embroidery unit is disengaged. Then makes sure you have selected the proper weave or
Question about Sewing Machines
My needle keeps breaking because it's hitting the square part of the presser foot that it goes down into. If your machine has multiple needle positions, make sure the needle is set in the center ...
63 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions