Janome Memory Craft 9000 Computerized Sewing Machine "machine needle threader" Questions

machine have a needle threader? first if so, pull it down and put the thread behind the left side of the threader and loop the thread around toward the needle then go behind the finger of the threader

machine with a threader that needs the needle height manually adjusted because the needle does not stop in any particular place. Usually, if I raise the needle to its highest, the threader will work.

...machine the needle threader does not work with the smaller needles, 9/65 and 11/75. The eye of the needle appears to be just short of the hook on the needle threader. I have no problems threading ...

machine with a needle threader had the little wire missing so I thought that I was doing something wrong, luckily JoAnn's had a Viking store inside and she showed me. So, I called Singer and they sent

...machine, and turned the wheel (which controls where the needle is) until the needle threader bar was straight (approximately 1/2 way between the needle being all the way down and all the way up). ...

...needle threader? Mine won't work on very small needle sizes so I resort to the old manual needle threader for these. Ditto for twin needles. Otherwise its a case of pulling the auto threader down so ...

...it would probably be better to take the machine to a sewing machine shop & have it done.my needle threader is attached to the needle threader bar inside the machine & I imagine your is

...are needle threaders available that have a long handle (3-4") with the wire threader at the end. It's easier to use than those tiny threaders. Amazon com Singer 7343 Serger Machine Needle Threader

machine, you would mount the needle threader over the needle screw. The part that fits over the needle screw of the needle threader is an eccentric. You rotate it until the hook of the needle threader

Needle threader won't work on my Singer 4423 Hi there, The needle threader hook is very tiny and easily bent or damaged. The needle threader is designed not to turn, if the needle is not at its most ...