Question about Husqvarna Sewing Machines
...bobbin case is compleatly pulled out and laying loose. I have to cut the nest of threads loose before I can remove the hoop. This happens about every 300 stitches! It suddenly started happening. Have ...
bobbin case, when you pull the thread through the bobbin case there should be slight resistence, if it is too loose turn the screw on the bobbin case clockwise about a quarter of a turn to tighten, if
Question about Bernina Sewing Machines
...stuck in the bobbin casing (chrome). How do I get it to release? Take the bobbin assembly loose and turn your hand crank and move it until the hook is at the top. Pull assembly apart and clean the ...
...bobbin case I have a 99K machine with a motor, which used to work fine, until just today when I needed to take the bobbin case out the thing where the under-thread bobbin lies. Now, after having ...
...bobbin case. I cleaned out the bobbin case, but found nothing, and the action was clean, even before I cleaned it. I'm a bit stumped by this one. Should I take off the whole top? The manual doesn't ...
Question about Necchi Sewing Machines
bobbin case and wrapped around the underside of the case...is that normal? And what could I be doing wrong? I had exactly the same problem on the exact same model 3205FA. I'm not an expert, but have a
Question about Husqvarna Sewing Machines
...will fit properly on the bobbin winder pin and will also fit accurately in the bobbin case to produce quality stitching. Make sure to use correct bobbins for trouble free winding and
Question about Elna Sewing Machines
...bobbin case or hook race or debris in the hook race, or needle hook interference. Always be sure to thread your machine with presser foot up. With foot up, the tension discs are separated to accept ...
...gets stuck in the machine underneath where the bobbin thread is. Please help me, I was on a roll making dresses for my baby girl who is due in June. I just got the machine a week ago. I have a singer ...
Question about Brother Sewing Machines
...bobbin case. I cannot find whether this spring is in the appropriate position since there is no picture in the manual or anywhere online. The needle thread is entering the bobbin area, getting stuck ...
131 questions posted
Usually answered in minutes!
565 Questions
193 Questions
90 Questions
79 Questions