Juki HZL-E80 Computerized Sewing Machine "stich length working" Questions

unit, then select the pattern you want, select widest stich and turn the length adjuster to the length that best suits that stich, (it could be from almost zero to full length depending on the pattern

stich length not New home ss-2015 White gunk? Wonder what that is... Sounds like something that may have been added. I would try to remove as much as possible. Most likely the lever is sticking due to

how do you set the length of the bobbin stich how do you set the length of the stitch? The bobbin works with your top stitch ..when you set the length of the stitch then it goes the same as the top

...stich length: display reads 2.5 actual stich length a 5-6, also dislplay reads "fix" or "stop" but machine doesn't tie off the thread as it should) Sounds like the circuit board has gone bad. Suggest ...

working and sounds normal but when I go to sew the material won't move, it just sews in one place. I think it might be related to the length of stiches as just before this happened it would not change

...length selector is not working, the feed dogs are not working, or the tension is too tight. Check the manual for your sewing machine for the correct tension setting. Thread the machine with the ...

stich length is set to 0, your should observe your feed dogs moving vertically up and down with no back/forward motion, however, increasing as you lengthen your stitch length. Repeat the previous high

Stiches form loops below the work I have adjusted the tension in every way imaginable, played with width and length, changed the needle size, tried different fabrics, and cleaned out the machine a ...

...stich patterns could be rendered unuseable. I have no idea of the current value of your sewing machine, but if you deem the repair costs prohibitive, there is a workaround so you can complete your ...

...stich Does it have a stitch length dial which ranges from 4 down to 0 and then into negative numbers?  If so, the negative numbers will be reverse stitches.  Some machines have this ...