Question about Sewing Machines
slowing down during sewing and then goes back to normal. If your sewing machine is slowing down during sewing and then goes back to normal, there are a few possible causes to consider: Tension Issues:
...you are sewing if it's slowing down sounds like something may be holding it back, only other thing that may cause something would be internally if not the feed dogs. let me know hope this helps ...
Question about Tacsew Sewing Machines
Is there a way to slow down the motor on a Tacsew blindhemmer machie want to slow down the motor someway for better control. the motor is under the table the machine sits on and is connected by a ...
brother serger slows down Serger starts fast and then slows down after sewing a while. it could be the motor or the power cord or the foot pedal, check to make sure the power cord and the foot pedal ...
motor makes noise and slowed down I have a new home sewing machine. The motor, makes a strange high pitched noise, it has now slowed doen so much I am unable to use it. It was working fine. It has ...
Question about Sewing Machines
Constant thread breaks: On my DMX 300 the thread goes through the take-up lever and falls back into the check spring area where it tangles with the upward-going thread. Possibly zero thread tension. ...
making a slow steady pull of top thread with presser foot up and then lower presser foot and make another slow steady pull. You should note the difference of no tension with foot up versus set tension
Question about Baby Lock Sewing Machines
baby lock slows down to 0 after sewing a few inches I can use the machine to sew a few inches and then it slows down to crawl, to nothing, then after it cools, I can use it again for a few inches and ...
Question about Singer Sewing Machines
sewing machine stops sews a minute slows down or stops then starts up when is start to sew machine starts sewing then slows down or stops, i step on pedal like if I were driving pumping it to keep ...
Question about Sewing Machines
Empisal dress maker 270d. is missing stitches. sews perfectly for a while then skip a few stitches. I have replaced the needle with a new one, and cleaned bobbin casing and checked tension. Now what? ...
125 questions posted
Usually answered in minutes!
111 Questions
75 Questions
56 Questions
44 Questions
29 Questions