...thread under a spring that keeps the bobbin tension. However you should check your manual. If you do not have a manual, check if one is available online. ...
thread a bobbin? TRY THIS, itma not be your model, but should help Title: How do I wind the bobbin? Pre-tension disk Bobbin winder shaft Bobbin 1.Pull up the spool pin as far as possible, and then put
Question about Kenmore Sewing Machines
...thread a bobbin,sears Kenmore model 158.17031 Place both the bobbin case and the bobbin on the table in front of you. Have the open side of the bobbin case facing up and the bobbin with the thread of ...
Question about Bernina Sewing Machines
...model, the bobbin should be placed in the bobbin case so the bobbin spins clockwise in the case. Make sure the bobbin thread is slipped into the bobbin case properly. After you've loaded the bobbin ...
thread should not pull through.) The bobbin case or race may be damaged. Depending on the brand and model, you may find a replacement at your sewing machine dealer or online. If you add a comment with
...thread the bobin. the bobin just sits on its flat side to go in the machine. Please help!!! Check the model number of the machine. White sewing machine manuals are available from Singer at ...
Question about Sewing Machines
...model has a transparent bobbin cover, when the bobbin has properly loaded its tensioner, you should see the bobbin thread over and across the top of the bobbin. If you don't, likely the thread has ...
Question about Sewing Machines
...Sewing Machine and Bobbin Case (not your model, but the threading and basic instructions will be similar or the same as your machine) How to thread Necchi model 535 FA sewing machine now with ...
...that i can sew. Check this web page http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Singer_Sewing_Machine_Threading/singer_477_threading_diagram.htm How do I thread my bobbin singer model ...
model 356, changed the thread on the bobbin and now its knotting up and not loose from the bottom, did i thread it incorrectly? tension is wrong now?? thanks! Check that the thread is tight around the
37 questions posted
Usually answered in minutes!
52 Questions
38 Questions
31 Questions
25 Questions
30 Questions