Question about PfaFF Sewing Machines
...darning foot. Put the machine into the darning position. Spread the fabric in an embroidery hoop and embroider in accordance with program 02. Lower feed dog If the feed dog is not lowered for ...
...darning foot. The feed dogs are down, stitch width is 0, length stitch is 2.5. The machine does not squeak when using regular sewing with feed dogs up. The machine was just serviced (cleaned at a ...
...darning foot is above the needle clamp and put the screw back on and tighten. As the needle bar raises and lowers, the foot will hop up and down slightly. Make sure that you always lower the presser ...
...put down the feet. With presser foot lever down (no feet and not foot holder on), it does not stitch the fabric. You probably do not have lever to put the feed dogs down. That's why you have a cover. ...
...put stitch length to zero, but the bottom bobbin does not catch. It does when the foot is on and down normally. I just got the machine serviced, is there something I'm not doing? Ashleigh--Your ...
Question about Sewing Machines
...darning foot. Help would be appreciated. on the machine, there is a foot holder attached to the machine, & the feet to the machine will either be snapped on to the foot holder or there is a screw ...
Question about Bernina Sewing Machines
...put the fabric in an embroidery hoop (upside down with the fabric next to the needle plate). If the hole is small, you can use the little hoop that should have been included in your Bernina accessory ...
Question about Brother Sewing Machines
...darning foot the machine won't pick up the bobbin thread. I have cleaned the race and bobbin area well. When I put the regular foot back on and raise the feed dogs again, everything is fine and the ...
Question about Sewing Machines
...darning /embroidering pressor foot. I want to do free hand sewing and cant as the feed dogs dont drop. I put the darn plate on but presser foot doesnt allow you to do free hand You really do need a ...
Question about Sewing Machines
...put the plate down to sew sew? What you are referring to is darning. Your manual should have instructions. You would need to install a darning foot, lower the feed dogs (or some machines have a plate ...
740 questions posted
Usually answered in minutes!
28 Questions
8 Questions
1 Questions
100 Questions
80 Questions