Question about Sewing Machines
...etc.; set each of the tensions in the middle of the range and test the stitch. There may be minor adjustment required to get a perfect stitch. Once you have stitched that first sample, here ...
minor. Check that you are installing the needle correctly, that the machine is threaded properly. Use only fresh, good quality thread--no bargain bin or old thread. Be sure to ALWAYS RAISE the presser
Question about Janome Sewing Machines
...problems and now the slide for changing stitch sizing is stuck as well. I end up doing most of my repair and alteration work by hand stitching (I'm very good at that) because the machine has been too ...
Question about Bernina Sewing Machines
...problems than the minor savings are worth. It's always uneven and never works well in my machines. Next - my method to solve most stitching issues. Unthread machine entirely. Remove bobbin case and ...
Question about Euro-Pro Sewing Machines
...Machine When you adjust the tension screw on the bobbin case, make only 1/8 turn at a time. A minor adjustment to the screw will make a big difference in the tension. ... Very very rarely do
...problems since day one despite being assured it was in good working order. The vendor refuses to return her calls or emails. The thread keeps breaking and she is unable to adjust the tension so that ...
stitches won't lock, or only lock randomly. I have changed the needle and tried making some minor tension adjustments, but nothing seems to be helping. The feed dog is engaged, it's threaded correctly
Question about Sewing Machines
stitches and sews slow motion. Is there a diagnosis that comes up on the screen? Either a letter or a letter and a number you can look up in the manual. It is a very minor adjustment that will fix the
stitches then stops with all lights blinking and continuous beep It usually means that your threading is not right, or thread tangled. I would totally unthread my machine, replace needle, and rethread
...sewing-off. If the machine fails to detect thread breakage and is a bit noisy, there might be a minor issue with the sensor and it may have been disabled. I've not generally found any major ...
18 questions posted
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions