...manual, if any are available. This model has been replaced. There is a threading guide in on the inside of the door on the front of the serger. Raise the presser foot and set the tension controls to ...
manual from a Baby Lock dealer. This model may have to be threaded in a certain order. Try raising the presser foot and setting the tensions to zero. Turn the handwheel so the upper looper (the curved
Timing if upper and lower loopers I was sewing late and was trying to do a tight corner without cutting the fabric so I pushed the cutter away from me, and it jammed into the feed dog plate and ...
Question about Singer Sewing Machines
...thread into a holder at the top, and then down into the "ditch" right below it, and following the curve in the ditch, thread up, then into the silver take-up lever. There is usually a hole in the ...
24 questions posted
Usually answered in minutes!
76 Questions
45 Questions
40 Questions