Question about Bernina Sewing Machines
...changing from thicker to thinner fabric and vice versa. Manual: BERNINA artista 180 Support BERNINA Bobbin Tension How and Why Tension is Adjusted Understanding Bobbin Tension Understanding Thread ...
Question about Bernina Sewing Machines
bobbin case tension. I tried a different bobbin with new thread and it is still loose and sloppy. What could it be? In checking I can either adjust the tenion screw and if that does not work, purchase
...bobbin cases, have set the thread tension to the 'red line'/standard and still no luck. Help?? A blunt needle can also cause this. Try pulling a button thread or any slightly thicker thread through ...
...bobbin tension on a bernina 830 Where does the multifunction tool go Generally the tension on the bobbin is set and the tension on the upper thread is balanced against it. To set the tension on your ...
...tension springs and bobbin. Cleaned and oiled the bobbin case, and played with the upper tension settings. None of this has worked If you threaded the machine with the presser foot lever raised and ...
...tension spring in teh bobbin case replace teh bobbin case check for fluff or dirt between teh tension plates of teh tension unit - a piece of paper rubbed between them will help take it to another ...
...tension can cause some problems as well. ( If you don't know how to adjust Bernina bobbin cases to factory settings, please ask). 7. Hook timing, (loop lift) can be out enough to affect thread ...
Question about Bernina Sewing Machines
...bobbin tension is loose. Is there an adjustment for bobbin tension? There is. It's the little screw on the side of the bobbin case. Be sure to mark its position BEFORE making any changes and turn it ...
bobbin tension I have a Bernina 1008 and am having trouble balancing the tension on the bobbin thread. It continually makes small loops over the upper thread as the machine sews no matter what setting
...bobbin tension using your universal tool (white handle). Open the bobbin door and put the notch of the tool on the pip above the bobbin holder and move it a couple of clicks to the right to increase ...
69 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions