Singer Quantum 9910 Computerized Sewing Machine "put needle" Questions

Ad

Question about Sewing Machines

1 Answer

...needles go "flat to back" while others are put in differently. Not all "Universal" needles are used in ALL machines. Please check your manual to see how to put your needle selection into the

Ad

Question about Rex Sewing Machines

1 Answer

...put a needle in. how do i fix it? do you know of a book i can buy so that i can fix this machine when a problem comes up. I'm assuming that your talking about the needle bar (where you put the ...

Ad

Question about Brother Sewing Machines

2 Answers

...put the needle back in. I think it just needs to be put back & tightened but I'm not sure how.. when you put the needle in the needle clamp holder the flat side of the needle goes toward the back ...

...a needle is to buy a needle threader, it is a device that you put through the eye of the needle and put the thread through its hole then just pull the threader back out and the needle is

needle holder cannot be turn to the highest point I unfortunately broke 2 needles. i successfully took the needles out and when i was about to put the 2 new needles- i cannot put it as the holder ...

Question about Kenmore Sewing Machines

1 Answer

...Thank-You Did you try putting in a new needle? And is the needle put in correctly? Otherwise , I am not sure about this one...I had that happen to me once, and putting a new needle in corrected

Question about Brother Sewing Machines

2 Answers

put a new needle in?? How?? The needle popped out while I was sewing, it hasn't broken, but I can't figure out how to put it back... There is a small screwdriver that comes with the sewing machine ...

Question about Singer Sewing Machines

1 Answer

...put the needle in the left position and bring the needle all the way down by turning the handwheel. As the needle comes up make the point of the hook enter the scarf of the needle (just above the ...

Question about Sewing Machines

1 Answer

...put in a new needle [email protected] thanks! There should be a screw down by the needle, by the presser foot. Unscrew that button and remove the old needle. To replace that with a new one... ...

put needle in the down position it hits the ruffler foot You may need to move the needle position left or right. Try a different stitch length. If the ruffler foot is installed correctly and needle is

Not finding what you are looking for?
Singer Quantum 9910 Computerized Sewing Machine Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...